<span id="nhr3x"><dl id="nhr3x"><del id="nhr3x"></del></dl></span>
<span id="nhr3x"></span>
<strike id="nhr3x"></strike>
<span id="nhr3x"><dl id="nhr3x"><del id="nhr3x"></del></dl></span><strike id="nhr3x"></strike>
<span id="nhr3x"><dl id="nhr3x"><del id="nhr3x"></del></dl></span>
<strike id="nhr3x"><i id="nhr3x"><del id="nhr3x"></del></i></strike><strike id="nhr3x"><dl id="nhr3x"></dl></strike>
<span id="nhr3x"></span> <span id="nhr3x"><dl id="nhr3x"><del id="nhr3x"></del></dl></span><strike id="nhr3x"></strike><strike id="nhr3x"></strike>
<strike id="nhr3x"><i id="nhr3x"></i></strike><strike id="nhr3x"></strike>
News
查看分類
Standard for various types of globe valves
SendTime:2017-01-05  Views:

Valve opening and closing parts are plug shaped valve, sealing surface flat or cone, fluid along the centerline of the valve for linear motion. The movement of the stem form, there are lifting rod (stem lift, hand wheel is not up and down), but also with the rotation of the rotary rod (hand wheel and stem together with the rotation of the nut in the valve body). Valve is only applicable to fully open and fully closed, does not allow for adjustment and throttle.

The valve is a mandatory seal valve, so the valve is closed, the valve must be applied to force the sealing surface does not leak. When the medium into the valve six from the bottom of the valve, the operating force required to overcome the resistance, is the stem and the packing friction and pressure generated by the media thrust force than the valve off the valve opening force, so the diameter of the valve stem, otherwise it will bend the stem top of the fault. In recent years, the emergence of self sealing valve, globe valve replaced by medium flow on the top of the valve into the valve chamber, then in the medium under pressure, the valve off a small force, and force open the valve, stem diameter can be reduced accordingly. At the same time, the role of the media, this form of valve is also more stringent. China's valve three to the provisions of the flow of the valve, will be top-down.

When the valve is opened, the opening height of the disc, the nominal diameter of 25% ~ 30%, the flow has reached the maximum, indicating that the valve has reached the full open position. Therefore, the valve fully open position, the valve should be determined by the itinerary.

Standard number

Standard Chinese name

Standard English name

DL/T531-1994

(2005 review)

Technical conditions of high temperature and high pressure stop valve and gate valve for power plant

GB/T11689-1989

Marine flanged cast steel globe valves (four carry)

Marine cast flanged stop steel valves

GB/T12235-1989

Steel flanged globe valves and lift check valves for general purpose valves

General purpose valves Flanged steel valves and lift check valves globe Industrial

GB/T12233-1989

General valve iron globe valves and lift check valves

General purpose valves Casting iron valves and lift check valves globe Industrial

GB/T1951-1984

Marine low pressure external thread bronze stop valve

Marine low bronze male threaded stop pressure valves

GB/T2499-1993

Marine cast iron flanged double valve box

Marine cast flange dual-row stop iron valves-case

GB/T590-1993

Marine flange cast iron globe valve

Marine cast flanged stop iron valves

GB/T594-1983

Marine forged steel globe valve

Marine forged male thread stop steel valves

GB/T584-1999

Marine flange cast steel globe valve

Marine cast flanged stop steel valves

GB/T595-1983

Marine bronze stop valve

Marine bronze thread stop male valves

GB/T587-1993

Marine flange bronze stop valve

Marine bronze flanged stop valves

JB/T7245-1994

Stop valve for refrigerating device

JB/T7747-1995

Needle stop valve

JB/T9081-1999

Technical specification for low temperature stop valve and throttle valve for air separation equipment

JB/T53165-1999

High pressure balance valve product quality grading

JB/T53174-1999

Globe valves grading of product quality

JB/T53155-1999

Classification of low temperature stop valves and throttle valves for air separation equipment

JB/T8859-2004

Specification for static life test of globe valves

HG/T3215-1986

Poly three vinyl chloride plastic lining stop valve

E29-350-2003 NF

Industrial valves - steel ball valves, globe valves and check valves

(Industrial valves - Steel and globe and check valves. stop) globe

P43-001-2000 NF

Valves for buildings - copper alloy globe valves for water supply in buildings - Tests and requirements

(Building valves - Copper stopvalves potable water in buildings supply Tests and requirements.) alloy for)

D36-380-2001 NF

Valve testing system for automatic stop valves for gas burners and gas appliances

(Valve proving for automatic valves for burners and gas appliances. shut-off) systems gas)

A84-621-2002 NF

Gas welding equipment. With welding, cutting and related processes of valve quick connection

(Gas welding equipment - coupling with valves for welding, cutting and allied processes.) in Quick-action

M88-771-1975 NF

Liquid hydrocarbon container assemblies - Manually operated globe valves - manufacture - function - Testing

(LIQUEFIED HYDROCARBON IN CONTAINERS. CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.) in INSTALLATIONS MANUALLY

P43-002-1981 NF

Building water pipe valves - water stop valves - General technical specifications

(VALVES AND FOR WATER IN BUILDINGS. VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.) in TAPS SUPPLY (STOP)

EN 13709-2003 BS

Industrial valves - steel ball valves, globe valves and check valves

(Industrial valves - Steel and globe and check valves stop) globe

1552-1995 BS

Specification for manually operated globe valves for class A, class two and class three

(Specification for bottomed taper valves for 1st, 2nd and family gases up to 200 mbar), open plug 3rd)

7461-1991 BS

Specification for electric automatic gas shut-off valves with flow regulators, closed circuit switches, closed position indicator switches, or air flow control

(Specification electrically operated automatic shut-off valves with throughput adjusters, proof of closure switches, closed position indicator or gas switches flow control) in,

1010-2-1973 BS

Specification for drain cocks and cut-off (spinning) valves for water supply and drainage installations - Part second: discharge cocks and globe valves

(Specification for taps and for water services (screw-down pattern) - Draw-off and above-ground taps stopvalves) stopvalves draw-off)

1873-1975 BS

Steel ball valves, globe globe valves and check valves for petroleum, petrochemical and related industries


數據提供:企速網絡    
日本真人做视频免费观看,高清一本知道免费观看,日本高清不卡一区二区,最新日本免费一二三区久草,中美日韩亚洲印度在线